Miedema Structural MS 4000 Trailed potato belt planter (75cm)

With over 30 years of experience, Structural is the specialist in belt planters on the market. The machine is suitable for large, small, cut and elongated tubers. From the bunker the tubers are presented on a buffer conveyor. The buffer conveyor transports the tubers on the wide belt conveyor, where the tubers are being singulated in 1 row. This singulation assures the correct quantity of tubers which are planted in the row, even at high driving speeds and with varied tuber sizes. The belt planting system makes the Structural planter extremely suitable for planting pre-sprouted tubers as well. Because of the minimal drops and the germination-friendly belt system, the sprout damages are being reduces to a minimum. • Large hopper with standard inspection grids and large tipping angle • Mechanical vibration system to assure proper singulation of the tubers • Splitter underneath the supply belt to assure continuous singulation of the tubers • Wedge shaped furrow opener to assure centering of the tubers in the furrow • Convex shaped covering discs with Ø 41 cm for optimal covering of the tubers • Standard road lightning which is mounted in the recessed of the hopper to avoid damage • The machine is equipped with 2 large wheels for easy movement • Standard tractor connection with 3-point trestle to assure optimal levelling of the machine • The drawbar is adjustable in length • Standard hydraulically driven machine • PM-Control and HMI operating display in the tractor

Price on request

 

Miedema Structural MS 4000 Trailed potato belt planter (75cm)

With over 30 years of experience, Structural is the specialist in belt planters on the market. The machine is suitable for large, small, cut and elongated tubers. From the bunker the tubers are presented on a buffer conveyor. The buffer conveyor transports the tubers on the wide belt conveyor, where the tubers are being singulated in 1 row. This singulation assures the correct quantity of tubers which are planted in the row, even at high driving speeds and with varied tuber sizes. The belt planting system makes the Structural planter extremely suitable for planting pre-sprouted tubers as well. Because of the minimal drops and the germination-friendly belt system, the sprout damages are being reduces to a minimum. • Large hopper with standard inspection grids and large tipping angle • Mechanical vibration system to assure proper singulation of the tubers • Splitter underneath the supply belt to assure continuous singulation of the tubers • Wedge shaped furrow opener to assure centering of the tubers in the furrow • Convex shaped covering discs with Ø 41 cm for optimal covering of the tubers • Standard road lightning which is mounted in the recessed of the hopper to avoid damage • The machine is equipped with 2 large wheels for easy movement • Standard tractor connection with 3-point trestle to assure optimal levelling of the machine • The drawbar is adjustable in length • Standard hydraulically driven machine • PM-Control and HMI operating display in the tractor Including the following options: Hydraulic drive with PM-Control PM-Control with HMI planter valve block controlled Load-Sensing amplifier Bucher valve bank Drawbar inclusive 3-point frame Tipping hopper 4.000 kg Hydraulic hopper via PM-Control Hydraulic lift/lowering via PM-Control Hydraulic control opener beam via PM-Control Furrow opener high with chisel Notched covering discs with scrapers Depth control wheel single left Depth control wheel single right Fill-Control on belts by HMI and backboard High speed return belts Rear axle ass’y 75-80 cm Steered rear wheels (30°) via PM-Control 2 Wheels Radial Alliance Row-Crop (D=1605, B=284) Spray set 3 nozzles/row Anti-drift spray nozzle 90-0067C – 3 nozzles/row Controls 1 section, elec. operated, Farmer Tank 2×400 liter Ladder and platform Pump 108 l/min hydraulic drive via PM-Control Marker hydraulic via PM-Control Discs on markers Preparation hydraulic drive application Extra hydraulic valve double acting max 25 l/min Joystick with 5 functions for HMI Road lights and markers boards Specifications: Number of rows 4 Row distance (cm) 75 Hopper Hydraulic tipping Bunker capacity (kg) 4000 Working width (cm) 4×75 Tractor connection Trailed Plant distance (cm) 3,8-50 per 0,1 cm Tyres rear Radial 11.2 R44 Wheel track (cm) 300 Power requirement (hp) 140 Weight (kg) 4500

+31 513 481 101